Ultimaker-2-Plus-Izquierda
Ultimaker 2+
October 4, 2016
Ultimaker-2-GO-Perfil-Derecho
Ultimaker 2 Go
October 4, 2016
Show all
Ultimaker-2-Extended-Plus-Derecha
Ultimaker-2-Extended-Plus-Izquierda
Ultimaker-2-Extended-Plus-Principal
Ultimaker-2-Extended-Plus-Frontal
Ultimaker-2-Extended-Plus-Trasera

Ultimaker 2+ Extended

9,500,000.00$ + IVA


The Ultimaker 2+ Extended is an out of the box experience and immediately ready to use, as it comes pre-assembled. If you’re looking for a DIY kit that you need to assemble yourself, check out our Ultimaker Original+.

Categories: , .

PRINTER AND PRINTING PROPERTIES
Assembly type: Pre-assembled
Layer Resolution
0.25 mm nozzle: 150 to 60 micron
0.40 mm nozzle: 200 to 20 micron
0.60 mm nozzle: 400 to 20 micron
0.80 mm nozzle: 600 to 20 micron

Build plate: 50˚ to 100˚ C heated glass build plate
Build plate leveling: Assisted leveling process
Print technology: Fused Filament Fabrication (FFF)
Print head: Swappable nozzle

Build speed
0.25 nozzle: up to 8 mm3/s
0.40 nozzle: up to 16 mm3/s
0.60 nozzle: up to 23 mm3/s
0.80 nozzle: up to 24 mm3/s

Print head travel speed: 30 to 300 mm/s
Feeder type: Geared feeder
XYZ accuracy: 12.5, 12.5, 5 micron
Nozzle diameter: Included are 0.25, 0.4, 0.6 and 0.8 mm nozzles
Nozzle temperature: 180˚ to 260˚ C
Nozzle heat up time: ~ 1 minute
Build plate heat up time: Operating sound: 50 dBA

MATERIALS
System: Open filament system
Filament diameter: 2.85 mm
Supported materials: PLA, ABS, CPE, CPE+, PC, Nylon, TPU 95A
Ultimaker filament: A spool of Ultimaker filament is 750 g

REQUIREMENTS
Software:Cura, our free print preparation software
Supported OS: Free on Mac OS X, Windows and Linux
Supported file types: STL, OBJ and AMF
File transfer: Standalone 3D printing from SD card (included)
Operating ambient temperature: 15˚ C to 32˚ C (59˚ to 90˚ F)
Nonoperating temperature:
0˚ C to 32˚ C (32˚ to 90˚ F)
Input100 – 240V
4A, 50-60Hz
221 W max.
Output: 24 V DC, 9.2 A

Weight 12.3 kg
Dimensions 49.3 x 34.2 x 68.8 cm